The RED model has a structure with double beam; a front transverse slide through the carriages on two linear guides, a rear reinforcement.
LineaTech RED offers various possibilities for applications such as flame cutting, plasma cutting, marking and pre-drilling mechanical device. LineaTech RED is a longitudinal twin motors with brushless motors and digital drives in absolute coordinates. The movement is achieved by mating rack and pinion and floating device and preloaded spring.
LineaTech RED can be equipped with up to 6 carts oxyfuel and plasma 2 trucks with a distance up to 5.500 mm and depending on the number of trucks covers a useful cutting width up to 4.500 mm.
In oxy-fuel, gas distribution group has 3 fully proportional valves controlled by CNC. As an option, a data base of the cutting parameters, makes the management of the gas fully automatic and controlled by the CNC.
In plasma, in addition to the traditional cutting systems, LineaTech RED features of the structure and mechanical suitable for the application of the most sophisticated systems for cutting high-definitionwith the optimal management of the parameters for a result of optimal cutting even on silhouettes of complicated processing and holes of small diameters. In addition, as and where available the option of automatic gas console, the CNC II can be enhanced with a data base for the automatic cutting parameters such as to make this machine, a machine of high performance and precision.
The numerical control CNC SOITAAB II with interactive menus and monitor “touch screen “in color, has a library of 30 figures fixed parameter and as an option can be extended up to 78 figures. ß
Rail span (min-max) - 3.000 mm - 5.500 mm
Machine length - 2.000 mm
Machine useful length with 4 meter rails - 2.000 mm
Longitudinal rails beam support - HEB - STD120 mm
Transversal beam construction - Double
Transversal guides - Roller-bearing linear guides
Rack - Vertical teeth
Longitudinal Motorization – Dual side drives
Displacement speed - 20 m/min
Quality standard - ISO 9013 e EN DIN 28 206ß
Max number of Master carriage - 2
Max number of Slave carriage - (plasma)1
Max number of Slave carriage - (oxy) 6
Double Master - 2 plasma or 1 plasma + 1 oxy
Gas distribution for oxy flame cutting - Automatic proportional valves
Maximum cutting thickness with oxy flame - 250 mm
Gas for oxy flame - Oxygen, propane, methane, acetylene
Plasma used - High performance or equivalent
Max plasma power - Up to 400 A
Bevel plasma - YES
Bevel oxy - MR + -90°
Drilling unit type - SO 30 for pre-hole
Tool Changer type – Manual or, Pneumatic
Tubo-cut type - Manual lifting
Pipe diameter - from 76 mm to 500 mm
Absolute coordinate - Optional
CNC type - SOITAAB CNCII
Parametric Shape Library - Standard, up to 30 (optional from 31 to 78)
Data base oxy - Optional
Data base plasma – Optional